Overall requirements:
According to the ISO 12156.1-2018 ASTM D6079-2018 test method, used for the lubrication performance evaluation test of diesel engine fuel(including diesel fuel containing lubrication performance modifiers). The operation of the automatic constant temperature and humidity system is simple and easy, and the corresponding control area can be activated by clicking on the main control interface. No other operation steps are required. After the test is completed, the sampling data in the experimental process is closed and stored, and the operator's operation steps are reduced. Increased efficiency.
Including:
1, constant temperature and humidity control device
2, constant temperature and humidity insulation test box body.
3, with 2 reinforced drying tubes.
Performance advantage of high frequency reciprocating tester for diesel lubrication evaluation of CMS-01
measurement microscope: measurement microscope has three sets of observation grinding system, each set of measurement system can be separately measured, and stored in the computer long-term preservation; The first set uses the eyepiece for observation, the second set uses the microscope's own screen for speckle observation, and the third set is to take photos of the speckle and observe the data on the computer monitor through measurement software; The microscope carrier can perform X and Y readings in both directions. At the same time, the Japanese Sanfeng digital differential reading counter is used to measure the data and the measurement accuracy is 1 μm. The measurement microscope fully meets the requirements of the latest version of the international diesel lubricating high-frequency reciprocating test machine method(HFRR),(standard number: ISO 12156.1-2018) for measuring microscope method A.